As you know, how the weather in the summer changes erratically. Today, the weather can be sunny and a great time for trips with family and friends. But, the next day, it will suddenly get cold, rain and possibly a storm. Therefore, The contractors and producers are extremely worried and scared in this character of erratic weather. Because, if they do not make regular moisture predictions, they will not be able to avoid the serious natural impacts on their buildings and materials. For example, A big storm happened suddenly. If manufacturers do not take immediate precautions and preserve, Their products will be able to be destroyed, quickly damaged, their productivity will be slowed, seriously affecting their workflow.
How to always control the change of weather? You and a lot of people want to know about this, right? Simply, a Hygrometer was born to solve these problems. How does it prepare for the storm? I don’t take your time anymore. Let’s follow along and learn through this article.
How can a moisture meter help you prepare for the hurricane season
A moisture meter can help you prepare for the hurricane season by identifying moisture penetration points in a structure before a storm strikes. Such as identifying leaked locations or places with inappropriate moisture on roofs, attics, walls, etc. Also, the walls of your house are normal, suddenly when you check the humidity you see it naturally has a higher humidity index than average. That is a sign for you to determine whether the storm is coming or not.
Check moisture regularly to monitor potential sources of moisture infiltration
The hygrometer can be an invaluable tool for monitoring moisture infiltration sources in the structure of a material, but how can you use them to detect the location of such moisture sources? In a position where the source of penetration cannot be seen with the naked eye?
A tip for finding a source of moisture in a building involves using three things:
- A flexible metal nail (may carry electricity)
- Insulated wire
- Pin – type, Pinless – type moisture meter.
Start by setting a nail into a part of the structure you know is wet from the previous testing or with obvious external symbols like discoloration or mold growth.
Then, tie a flexible wire with insulation to the foundation and one of the lines on the hygrometer. After attaching this cord, push the other contact pin to other parts of the wall where you think it might leak. If the hygrometer gives higher humidity than normal, the wall is wet between the two points of contact; If the meter gives a normal response, the material between the pins is not a leak path. This helps you identify the overall area of the affected area and find the moisture leak path fairly quickly so you can identify its source.
If you work with large, flat surfaces, the battery-free watch can also be used to quickly scan large areas for moisture infiltration. Just push the scanner against the wall, floor or ceiling to check and read the humidity. Then lift it and test another part of the material if necessary until you have a complete prediction of the material’s moisture content.
During regular humidity tests, it is possible to determine where the leak origin is so that it can be overcome before a major storm occurs and makes things worse.
How to use a hygrometer after the storm
The hygrometer can also be useful for recovery efforts after storms affect structures by allowing you to recognize moisture-affected materials throughout the structure that need to be removed and replace. You can even use the humidity measurement to quantify liquid damage to a building for storage purposes by demonstrating whether it is necessary to dry or tear.
I have presented in the immense benefits of a hygrometer in hurricane prediction and post-storm damage recovery. Do you think it’s very important in our lives? If yes, buy for your family the best moisture meter right now. Finally, hope that this article has been helpful to you and thank you for taking the time to read.