How to sharpen the blade of the best wood planer?

The key part that makes your project successful is the blade. This is extremely understandable because it is the main part that participates in the woodworking process. Therefore, its quality directly affects the efficiency and productivity of the carpenter.

The blade of the planer has two parts: the bevel and the back. The bevel is the short end on the cutting edge, and the back is the flat part of the planer blade. The purpose of whetting your planer blade is to make these two parts as smoothing and flattening as possible so they can intersect during operation. The flatter and smoother they are, the sharper the blade will be.

So, in this article, I will show in detail how to sharpen the blade of a wood planer at home for those who do not want to take it to a repair center. Let’s explore.

blade-wood-planer

Before you start sharpening

  • Unplug the tool: Make sure there is no more power on the device.
  • Even though they are old, blades can still cut you. Therefore, do not be subjective but put your hands on it. You may be injured
  • Remove any material that remains on the blade.
  • Check that you are sure to remove the blades properly( especially for the best thickness planer). Read the instructions provided with the tool to make sure you clamp the right blade. Check back once when you’ve set everything up

The equipment you need

  • The honing guide
  • A set pattern (made from scrap wood)
  • Grindstone
  • Magnifier to check your progress

How to sharpen wood blades

Sharpening your wood planer blade consists of a few simple steps:

  • Set the Honing Guide

After placing the sharpening guide on a smooth and flat surface, place your planer blade in the guide to check that the guide will hold the blade securely in the beveled position. Then make adjustments until the bevel is completely connected to the surface.

A sharpening guide is made to keep the planer blade at a consistent angle for the duration of the sharpening process. The lower the angle you set, the sharper your blade will be; however, the edge will be less durable. A 30-degree angle is ideal for a sharp and durable planing blade.

To set the guide at an angle of 30 degrees, you must have a 38 mm planing blade pushed out of the guide. To do that, you have to use two pieces of scrap wood with square edges. Place two pieces of wood 38 mm apart and fix them at a distance with screws and glue.

By using the setup mold with your sharpening guide, you can ensure that you are positioning the planer blade to the same distance each time.

  • Oil the whetstone

This oil is specially created to clean metals

  • Remove the nicks

To remove nicks from the blade, we need to apply the rough side of the whetstone with a push motion. When the nicks are removed, move the planer blade across your grindstone or make sure the blade stays still. If the blade moves, the edge of your planer blade will warp.

  • Flatten the back

Now it’s time to flatten and polish the back of the planer blade. You need to start with a rough grit (takes the most time), then turn to medium and then grind finely. You only need to do this with the 1 inch closest to the edge, but you still need to make sure you are applying enough force down to the planer blade to make it completely flat.

Once you’ve done the three grit steps, the back of the planer blade will look like a mirror.

  • Sharpen bevel angle

Take your sharpening guide and planer blade and use them to rub on the roughest whetstone. As with the back, make sure that the entire face of the bevel is concealed. Use your magnifying glass to track your progress. Once you are done with a rough grit, switch to medium grit. Finally, repeat the process until the Bevel of the blade is smooth and flat.

  • Check the sharpness

Now take any piece of wood and try shaving. If you feel the process is faster and more accurate than before then you have succeeded.

In conclusion

Sharpening your wood planing blade is an important process during maintenance. If you do not do that often, you will not be able to keep the quality of your projects at its best.

If you find sharpening quite complicated, you can use a hand wood planer which the best wood planer for beginners.  Hopefully, the article is helpful for you and thank you for taking the time to read through this article.

The 7 best hot glue guns in 2019

A perfect hot melt glue gun has to help people a lot at work. It will help you fix common household items and fix small items like handmade stickers, cushions, and small buttons and so on, besides it helps with home decoration activities and toys for children…

Hot glue guns are easy to control, simple to use and most importantly they are very delicate and compact. furthermore, It has a heating element in the gun. The heating element ignites the melt and you can carefully apply it on manual or necessary repairs.

You will find many types of glue guns available on the market and even online. Each glue gun has different uses and serves a different purpose. For example, a decorative handicraft needs a low heat glue gun to repair cushions, furniture or plastic and to fix shoes, these need heavy hot glue guns.

The following hot glue guns use the latest innovative components to meet your needs and help to ensure you do your best work.

So here is my list of The 7 Best Hot Glue Guns.  

  1. VTech NyLeo 20W silicone hot glue gun.

This is the same model as the glue gun above but different colors and imported by other units.

  • Silicone hot glue gun has a capacity of 20W suitable for making hot glue. It is made of solid, safe and helps you to get most of the material.
  •  It costs $4.
  1. TEXET HH-138 hot glue gun
  • Texet HH-138 hot glue gun is one of the familiar brands. Therefore, its price is also higher than in the above model. With the capacity of 10W so you need about 5-7 minutes to heat candle glue
  • Body made of hard plastic used to make the feeling less ho. Used to paste many different materials such as wood, ceramic, hard plastic, leather shoes, paper …
  •  It is warranted for up to 12 months, it costs $ 6.
  1. Pro’skit GK380B glue gun
  • Compared to the Texet glue gun, the Pro’skit glue gun is even more famous, with the glue gun models considered by many to be professional and effective. Pro’skit GK380B glue gun has some notable features:
  • Power up to 80W helps you speed up work and Pro’skit GK380B glue gun with good plastic material, heat resistance, and effective insulation.
  • Moreover, Glue does not backflow and it uses simple, effective, and professional. It costs $11.
  1. Stanley 69-GR20B glue gun
  • This is a glue gun from the famous American brand Stanley Black & Decker. Buying products from a big brand gives you more confidence in quality, even though it is also made in China. It made of good, durable material and used to paste in many different locations and on different types of materials.
  • Stanley 69-GR20B glue gun with a handle that fits, is firm, and effective.
  •  It costs $11.
  1. Asaki AK-9026 silicon firing gun
  •  If you need a professional, high-quality silicone glue gun, you can choose this model. Although the Asaki brand is not too famous, their glue gun models are appreciated by many users for its accuracy and efficiency when working.
  • With good plastic material, sure, bearing and good heat resistance Fast working speed, accurate glue firing and it’s easy to control and manipulate the control buttons right at the handle and used in production or at home, they bring good work efficiency.
  •  It costs $20.
  1. Smato CH-300 silicone glue gun 
  • This is the only type of silicone vapor glue gun that we mentioned in this article. It is sometimes referred to as Korean, but you only need to care about the machine made in China. The obvious advantage of this model is that it requires no electricity. The other is that it is also evaluated in ponds in the form of air gun.
  •  Reference price: $14.
  1. Bosch GKP200CE glue gun
  • This is a glue gun model with prices up to nearly 2 million. Therefore, it would be more suitable for professional people.
  •  It is important that you know the advantages of this product if you want to own it.

In conclusion

I have introduced you to some of the best products available today, some types of glue guns at small to high prices. It has different uses and purposes, but all of those glue guns are very compact. I hope the information above will help you know the information needed to choose the best glue gun for you.

Use a moisture meter for the hurricane season

As you know, how the weather in the summer changes erratically. Today, the weather can be sunny and a great time for trips with family and friends. But, the next day, it will suddenly get cold, rain and possibly a storm. Therefore, The contractors and producers are extremely worried and scared in this character of erratic weather. Because, if they do not make regular moisture predictions, they will not be able to avoid the serious natural impacts on their buildings and materials. For example,  A big storm happened suddenly. If manufacturers do not take immediate precautions and preserve, Their products will be able to be destroyed, quickly damaged, their productivity will be slowed, seriously affecting their workflow.

How to always control the change of weather? You and a lot of people want to know about this, right? Simply, a Hygrometer was born to solve these problems. How does it prepare for the storm? I don’t take your time anymore. Let’s follow along and learn through this article.

How can a moisture meter help you prepare for the hurricane season

Moisture Meter
Moisture Meter

A moisture meter can help you prepare for the hurricane season by identifying moisture penetration points in a structure before a storm strikes. Such as identifying leaked locations or places with inappropriate moisture on roofs, attics, walls, etc. Also, the walls of your house are normal, suddenly when you check the humidity you see it naturally has a higher humidity index than average. That is a sign for you to determine whether the storm is coming or not.

Check moisture regularly to monitor potential sources of moisture infiltration

The hygrometer can be an invaluable tool for monitoring moisture infiltration sources in the structure of a material, but how can you use them to detect the location of such moisture sources? In a position where the source of penetration cannot be seen with the naked eye?

A tip for finding a source of moisture in a building involves using three things:

  • A flexible metal nail (may carry electricity)
  •  Insulated wire
  • Pin – type, Pinless – type moisture meter.

Start by setting a nail into a part of the structure you know is wet from the previous testing or with obvious external symbols like discoloration or mold growth.

Then, tie a flexible wire with insulation to the foundation and one of the lines on the hygrometer. After attaching this cord, push the other contact pin to other parts of the wall where you think it might leak. If the hygrometer gives higher humidity than normal, the wall is wet between the two points of contact; If the meter gives a normal response, the material between the pins is not a leak path. This helps you identify the overall area of the affected area and find the moisture leak path fairly quickly so you can identify its source.

If you work with large, flat surfaces, the battery-free watch can also be used to quickly scan large areas for moisture infiltration. Just push the scanner against the wall, floor or ceiling to check and read the humidity. Then lift it and test another part of the material if necessary until you have a complete prediction of the material’s moisture content.

During regular humidity tests, it is possible to determine where the leak origin is so that it can be overcome before a major storm occurs and makes things worse.

How to use a hygrometer after the storm

The hygrometer can also be useful for recovery efforts after storms affect structures by allowing you to recognize moisture-affected materials throughout the structure that need to be removed and replace. You can even use the humidity measurement to quantify liquid damage to a building for storage purposes by demonstrating whether it is necessary to dry or tear.

In conclusion

I have presented in the immense benefits of a hygrometer in hurricane prediction and post-storm damage recovery. Do you think it’s very important in our lives? If yes, buy for your family the best moisture meter right now. Finally, hope that this article has been helpful to you and thank you for taking the time to read.

My favorite plier-the clicking tree branches pliers

Nowadays, with the growth of technology and science in the world, people have a variety of choices in all areas of society. We can not deny that we have so many choices of jobs nowadays. So it depends on the condition, characteristic, and capacity of each person to choose the appropriate jobs for themselves. People will have different hobbies and passion. When they choose to do their jobs, they all have enthusiasm with them. Especially, each profession has its nobility and value. And I also a person that love and cherish my work every day. In this article, I want to share with you my job and my life with this job.

After I graduated from university, I start my job as a farmer in my small village. When mentioning about the job-farmer, a lot of people will think that it is manual work and very hard work every day without getting much rest. That’s right when people think like that. The farmers are hard workers regardless of whether it is sunny or rainy. Do you want to know why I choose to work as a farmer? That is a long story about my life. My village is small and far from the city so the economy is not very good. The income of each family depends mainly on farming. And my family is not excepted. So when I was a child, I had a dream that after leaving college, I will come back to our village to start my work and help my village develop.

The clicking tree branches pliers

Do you know why I mentioned to the clicking tree branches pliers in this article? I guess you know the answer. The farmers have a lot of works each day. Some people can raise pigs, buffaloes, cows, and fish or others can plant fruit trees. They can open and work in big farming or small farming that depends on many aspects of their life. With me, the first time I came back to my village, I have small farming to cultivate fruit trees such as orange and grapefruit. About two years later, I develop this farming become quite big farming to cultivate orange. And now my farming has more than one thousand oranges.

I think that each farmer will know about the clicking tree branches pliers. The reason is that this device can be considered as one of the most important devices with each farmer. With the farmers like me, the clicking tree branches pliers are an indispensable tool in the gardening tools. This tool always has high applications and functions in our life. It can be seen that there are a lot of pliers that are extensively applied in the electricity industry, mechanical industry, and telecommunication industry. Some pliers are popular nowadays such as the electronic pliers, cutting wire pliers, pointed beak pliers, and multi-function versatile pliers. We can consider the clicking tree branches pliers as the most popular in the agricultural industry. The important function of this tool is to cut branches for tree. So let’s follow my next paragraph here to understand more about the clicking tree branches pliers and my working day.

How does the clicking tree branches pliers help us in working?

You know that every tree will have a lot of branches that some branches can be dry, death or being broken by many types of bugs. That’s why we need to cut these branches to help trees develop well. Especially, with the fruit trees, we must take care of and cut or click branches carefully. So at this time, the clicking tree branches pliers have a lot of benefits and functions with people.

With one thousand orange on farming, I need to find the best way to take care of the oranges easier and quicker. I realize that the clicking tree branches pliers are the best solution for me to solve this problem. I often cut the branches of orange in the morning because this time is cool and good for trees. The clicking tree branches pliers help me a lot to cut big branches, dry branches, and dead branches. Besides, with the fruit trees, we must carefully click and cut the branches that make the trees bushy. Because these branches will reduce the quantity and quality of the fruit. Some farmer also uses scissors or knight to cut and click branches for trees. However, if we use scissors to cut, we must need a lot of time and force. The clicking tree branches pliers can work with high speed and high efficiency so we can save time and force to relax or do other works. That’s why I can cut and take care of my farming easily and effectively.

To sum up

The clicking tree branches pliers are one of my favorite devices when I work on the farm. This device is the main factor that makes me successfully in my job. And I think that with other works, we must buy the best pliers set to success in our works.